Fujitsu iScanner fi-6010N Operator's Manual page 552

Code
6A012002
6A012003
6A012004
7A013001
7A013002
7A013003
7A013004
7A013005
7A013006
7A013007
7A023101
7A023102
7A023103
516
Message
Duplicate scanner name. Scanner
name: XXXX MAC address: XXXX IP
address: XXXX
Tried to exceed the scanner registra-
tion limit.
Tried to exceed the user roaming data
registration limit.
System update System_version
could not be released. Details: XXXX
Add-in install Add-in_name [Add-
in_group] could not be released.
Details: XXXX
Scanner settings XXXX could not be
released. Details: XXXX
Job Mode Settings could not be
released. Details: XXXX
Update call for system update
System_version failed. Details:
XXXX
Update call for Add-in install Add-
in_name [Add-in_group] failed.
Details: XXXX
Update call for scanner settings
Settings_group failed. Details:
XXXX
System update could not be applied.
Details: XXXX
Add-in install could not be applied.
Details: XXXX
Scanner settings could not be applied.
Details: XXXX
Action
Change the scanner name or delete
unneeded scanner data, and try
again.
This error may occur when the
MAC address is changed in the
maintenance process. In this case,
delete scanner configuration data,
and re-start the scanner.
Delete any unneeded scanner
configuration data.
Delete any unneeded user roaming
data.
Ensure that there is enough free
disk space available. Check that
there are no errors in the event
viewer.
Check the network status.
Refer to the system log for the
scanner.