5. Select a name format.
By default, "Scanner Name" + "Date"+ "Time" is entered.
•
If the [Prefix] button is selected
The character string entered in the input field is used as the file name.
This may be up to 32 characters long, excluding the following symbols.
\ / : * ? " < > |
ATTENTION
•
If the [Scanner Name] button is selected
The scanner name is used as the file name.
•
If the [User Name] button is selected
The name of the currently logged in user is used as the file name.
•
If the [Date] button is selected
The date of the scan is used as the file name. Select the Date Format [List] button to change
the date format.
• If the [Time] button is selected
The start time of the scan is used as the file name.
HINT
6. Press the Seq. Number [List] button.
⇒
The sequence number list appears.
7. Select a sequence number.
The sequence number is added to the end of a file name.
The default value is "Min 3 digit Seq. Number".
If "No Sequence Number" is selected, a sequence number is not added.
68
The following file names cannot be used:
•
CON
•
PRN
•
AUX
•
CLOCK$
•
NUL
•
COM0 to COM9
•
LPT0 to LPT9
File Names are created according to the following order of preference
•
Prefix
•
Scanner Name
•
User Name
•
Date
•
Time
Select the Date Format [List] button to change the date format. Select the
Delimiter [List] button to change the delimiter.