Sending The Scanned Data By E-Mail - Fujitsu iScanner fi-6010N Operator's Manual

6.4

Sending the Scanned Data by e-Mail

ATTENTION
1. On the "Main Menu" screen, press the [e-Mail] button.
⇒
The "Send e-Mail" screen appears.
HINT
2. Enter e-mail addresses in "To", "Cc", and "Bcc" fields.
For more details about E-mail Address setting values, refer to
Values" (page
To enter multiple addresses, separate each mail address with a ";". A scan can be sent to a
maximum of 30 addresses at any one time.
HINT
If an LDAP server is set, register the user e-mail address with the
LDAP server. If not registered, e-mails cannot be sent.
The scan information can be changed by pressing the [Scan Settings] but-
ton.
For more details, refer to
420).
e-Mail addresses can be selected directly from the e-mail address book.
For details, refer to "6.4.1 Selecting an e-Mail Address from the e-Mail
Address Book" (page 269).

6.4 Sending the Scanned Data by e-Mail

"6.8 Setting the Scan Options" (page
"B.1 e-Mail Address Setting
fi-6010N Network Scanner Operator's Guide
304).
6
265