Fujitsu iScanner fi-6010N Operator's Manual page 509

Screen
Startup Scan- Application could not be started. Sys-
ner tem restored to last known good state.
Contact a system administrator.
Scan Viewer Scan not possible. Number of scan
pages exceeds the maximum (XXX
pages).
All scanned pages are blank. Check the
documents.
"Blank Page Skip" is set to "Auto", so
all scanned pages were cleared.
Job Menu Notification e-mail could not be sent to
the administrator.
Others Cannot connect to the LDAP server.
LDAP server response error.
Message
fi-6010N Network Scanner Operator's Guide
Action
System or user settings were
restored at system restart. The
administrator should check the
restored system or user settings.
Finish all operations (sending mail
or fax, printing, saving to network
folders), and try again.
Turn the "Blank Page Skip" option
"Off", and try again.
"6.8.15 Blank Page Skip" (page
333)
Contact an administrator to check
if sending e-mail is possible.
Try the following:
• The network settings may not
be valid. Contact a system
administrator to have the net-
work settings checked.
"8.3 Network Connection
Troubleshooting" (page 388)
• The server is not working. Con-
tact a system administrator to
have the server status checked.
• If using SSL communication
when connection to the LDAP
server, contact an administrator
to check if the server certificate,
issued from a root certification
authority, is installed on the
LDAP server.
• Enter a valid user name and
password.
Try the following:
• Contact a system administrator
to check whether the LDAP
server is available.
• Set a valid user name and pass-
word.
E
473