Fujitsu iScanner fi-6010N Operator's Manual page 475

Screen
Network Access was refused. Login is not pos-
Printer sible at this time.
Access was refused. The specified
account is currently locked out.
Access was refused.
Operation not possible. Network path
is not working.
Not connected to the network.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Length of specified network printer
path exceeds the maximum selectable
path length. This printer may not be
selected.
Cannot acquire network information.
Specified user is no longer able to
login to this network printer.
Message
fi-6010N Network Scanner Operator's Guide
Action
Try the following:
• Try again when login is possi-
ble.
• Contact a network administrator
to have the time setting
changed.
Contact a network administrator.
Contact a server administrator to
find out if an access permit has
been set.
Contact a server administrator.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network printer. If
the system network is not operat-
ing properly, refer to "Failure to
connect to a server using its IP
address" (page 393) for further
solutions.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Select a different network printer
and try again.
Contact an administrator for the
specified server.
The specified user account has
expired.
Try the following:
• Login with a different account.
• Contact a network administrator
to have the account validated.
E
439