Fujitsu iScanner fi-6010N Operator's Manual page 534

Code
12030100
12040001
12040002
498
Message
Error: could not print.
Cannot find the network folder
path.
Access to network folder was
refused.
Action
Try the following:
• Check that the LAN cable of the scanner
and file server is connected properly.
• Contact a system administrator to check
that the scanner IP address and regis-
tered network printer path settings are
correct.
• Check the network printer authority
privileges.
Try the following:
• Check that the LAN cable of the scanner
and file server is connected properly.
• Check that the file server is working
properly.
• Contact a system administrator to check
that the scanner IP address and network
folder settings are correct.
"8.3 Network Connection
Troubleshooting" (page 388)
• When creating a folder, if the name of
the folder to be created is already used
by a file in the save location network
folder, it cannot be created. Change the
name of the file, or change the file name
settings.
For saving to the FTP server network
folder, try the following:
• Contact a system administrator to check
whether or not read or write access to
the FTP server network folder is permit-
ted for the currently logged in user or
authenticated user.
• Check if the file attribute has been set as
hidden.
• Check that the target file to be overwrit-
ten is not used, and try again.
Try the following:
• Contact a system administrator to check
whether or not access to the network
folder is permitted for the currently
logged in user or authenticated user.
• Check if the file attribute has been set as
hidden.