Rotating A Scanned Page; Adding A Scanned Page - Fujitsu iScanner fi-6010N Operator's Manual

6.10.2 Rotating a Scanned Page

The scanned data showed on the "Scan Viewer" screen can be rotated 90 degrees right or left, or
180 degrees.
If the scanned data is rotated 90 degrees, the edited scanned data, in its rotated condition, can be
sent as an e-mail attachment, by fax, print, or saved to a network folder.
1. On the "Scan Viewer" screen, press the [Previous] or [Next] button to display the
page you wish to rotate.
2. Press either [90°] or the [180°] button.
If
If
If
HINT

6.10.3 Adding a Scanned Page

On the "Scan Viewer" screen, an additional page can be scanned.
1. Load the documents into the ADF paper chute.
2. On the "Scan Viewer" screen, press the [Scan More] button.
⇒
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
Any additionally scanned pages are added after the current scanned data. The page num-
bers of additional pages will follow on from the last page of the current scanned data.
The maximum number of pages that can be scanned is 100 for a print operation, and 999
for other operations.
However, more pages can be scanned if blank pages are skipped, up to the maximum
number of pages allowed.
When the scan has completed, the "Scan Viewer" screen opens and shows any addi-
tionally scanned pages.
344
is pressed, the page is rotated 90 degrees to the left.
is pressed, the page is rotated 90 degrees to the right.
is pressed, the page is rotated 180 degrees.
The actual scanned data is updated to include the rotated page as soon as
the button is pressed.
If the [Cancel] button is pressed, all the scanned data is deleted and the
screen returns to one of the following.
•
Send e-Mail
•
Send Fax
•
Print
•
Save
•
Job Menu