Fujitsu iScanner fi-6010N Operator's Manual page 500

Screen
Scan Test
Send e-Mail
464
Message
Scanner initialization has failed. Try
turning the power off and back on
again. The administrator should con-
tact the FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help.
Invalid "From" address. Re-enter the
address and try again.
Invalid "To" address. Re-enter the
address and try again.
Invalid "Cc" address. Re-enter the
address and try again.
Invalid "Bcc" address. Re-enter the
address and try again.
No more than 30 "To" addresses are
allowed.
No more than 30 "Cc" addresses are
allowed.
No more than 30 "Bcc" addresses are
allowed.
Current login (LDAP account) has
become invalid.
Action
Try the following:
• Check that the cables are con-
nected to the scanner properly.
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least ten seconds, then recon-
nect the AC cable and try turn-
ing the power back on again. If
the error status persists, contact
your FUJITSU scanner dealer
or an authorized FUJITSU scan-
ner service provider.
Enter a valid e-mail address
including "@".
Enter a valid e-mail address
including "@".
Enter a valid e-mail address
including "@".
Enter a valid e-mail address
including "@".
Reduce the number of "To"
addresses to 30 or less.
Reduce the number of "Cc"
addresses to 30 or less.
Reduce the number of "Bcc"
addresses to 30 or less.
Contact a system administrator to
have the login account validated.