Fujitsu iScanner fi-6010N Operator's Manual page 531

Code
12020002 Could not connect to server
when sending fax.
12020003 "From" address was rejected by
the server when sending fax.
12020004 "To" address was rejected by
the server when sending fax.
12020005 Fax size exceeded maximum
fax size allowed by the SMTP
server.
12020006 SMTP server connection was
lost while sending fax data.
Message
Try the following:
• Check that the LAN cable of the scanner
• Contact a system administrator to check
• Contact a system administrator to check
Contact a system administrator to check
that the specified e-mail source address is
authorized for use on the server.
Contact a system administrator to check
that the specified e-mail destination
address is authorized for use on the server.
Contact a system administrator to check
the "Maximum Attachment Size" setting.
"4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 100)
Try the following:
• Check that the LAN cable of the scanner
• Contact a system administrator to check
• Contact a system administrator to check
• Contact a system administrator to check
fi-6010N Network Scanner Operator's Guide
Action
and SMTP server is connected properly.
that the scanner IP address, SMTP
server and fax server settings are cor-
rect.
"8.3 Network Connection
Troubleshooting" (page 388)
that the SMTP and fax servers are work-
ing properly.
and SMTP server is connected properly.
that the scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection Troubleshoot-
ing" (page 388)
that the SMTP server is working prop-
erly.
the maximum e-mail size allowed by
the SMTP server.
E
495