Fujitsu iScanner fi-6010N Operator's Manual page 35

Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of electronic
noise. Also, protect the scanner against any static electricity, which can cause the
scanner to malfunction.
Avoid any contact when scanner is in use.
Avoid touching any scanner mechanism during scanning since this may cause injuries.
Disconnect the power plug from the power outlet when the scanner is not
used for a long period of time.
When the scanner is not going to be used for a long period of time, be sure to
disconnect the power plug from the power outlet.
Do not install the scanner in direct sunlight.
Do not install the scanner under direct sunlight or near heating apparatus. Doing so
might cause excessive heat to build up inside the scanner, which can cause scanner
trouble or even fire. Install the scanner in a well-ventilated location.
Handle documents carefully.
When handling documents, be careful not to cut your fingers with them.
Do not make the scanner wet while carrying it outside.
When carrying the scanner outside while it is raining or snowing, pay special attention
so the scanner does not get wet.
Do not place the scanner in areas, which are subject to high levels of shock
or vibration.
Do not place the scanner in areas, which are subject to high levels of shock or vibration.
Doing so may cause the scanner to malfunction.
fi-6010N Network Scanner Operator's Guide xxxiii