Fujitsu iScanner fi-6010N Operator's Manual page 483

Screen
Add-in Specified Add-in data contents are
Manager invalid.
Specified Add-in file cannot be
applied to this system.
Specified Add-in could not be
uploaded.
System version xx or later is required
to install the specified Add-in.
Admin Tool Connection error.
Cannot connect to this system version.
Job Settings Session has timed out. Click the
"Close" button in the toolbar to close
the edit settings window.
A fatal error has occurred. Close the
Job Settings session, then try again. If
the problem persists, the administra-
tor should contact the FUJITSU scan-
ner dealer or an authorized FUJITSU
scanner service provider for help.
Insufficient memory to continue.
Close the Job Settings session, then try
again.
Insufficient free disk space to con-
tinue. Close the Job Settings session,
then try again.
Message
fi-6010N Network Scanner Operator's Guide
Action
Check the contents of the specified
Add-in module.
Check the system version, prepare
the correct version of the update
file, and try again.
Try the following:
• Check if the specified update
file is correct, and try again.
•
Specified update file may not
be uploaded because of a net-
work error. Check the network
status.
Update the system, and then install
the Add-in module.
For more details about the process,
refer to "8.3.3 Failure to Access
the Scanner using a Web Browser,
Admin Tool, or Central Admin
Server" (page 397).
Install the Admin Tool from the
scanner, and try again.
Close the edit settings window,
and try again.
Close the Job Settings session, and
try again.
Ensure that there is enough mem-
ory capacity available, and try
again.
Ensure that there is enough free
disk space available, and try again.
E
447