Fujitsu iScanner fi-6010N Operator's Manual page 494

Screen
Login
458
Message
Scanner initialization has failed. Try
turning the power off and back on
again. The administrator should con-
tact the FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help
Invalid LDAP Search Base format.
LDAP server is busy.
Action
Try the following:
• Check that the cables are con-
nected to the scanner properly.
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect try
turning the power off for ten
seconds, and back on again. If
the error status persists, contact
your FUJITSU scanner dealer
or an authorized FUJITSU scan-
ner service provider.
Contact a system administrator to
have the LDAP search base format
corrected.
"4.7.8 Setting the Login LDAP
Server" (page 88)
Try the following:
• Contact a system administrator
to have the network settings
checked.
"8.3 Network Connection Trou-
bleshooting" (page 388)
• Contact a system administrator
to have the server status
checked.