Fujitsu iScanner fi-6010N Operator's Manual page 497

Screen
Scanning Insufficient memory. Try turning the
power off and back on again. If prob-
lem persists, the administrator should
contact the FUJITSU scanner dealer or
an authorized FUJITSU scanner ser-
vice provider for help
An error has occurred. Some pages
were skipped. Try again after turning
the power off and back on again. If
problem persists, the administrator
should contact the FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider for help.
Number of Skipped Pages: XXX
Message
fi-6010N Network Scanner Operator's Guide
Action
Try the following:
• Reduce the size of the scan data
or set a lower resolution level,
and try again.
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least ten seconds, then recon-
nect the AC cable and try turn-
ing the power back on again. If
the error status persists, contact
your FUJITSU scanner dealer
or an authorized FUJITSU scan-
ner service provider.
Try the following:
• If the scanner does not restart
automatically, press the [Shut-
down] button on the "Login"
screen to turn the power off, and
turn the power back on again to
restart the scanner.
• If the error status persists after
the scanner is restarted, press
the [Shutdown] button on the
"Login" screen, disconnect the
AC cable from the scanner to
turn the power off, wait for at
least ten seconds, then recon-
nect the AC cable and try turn-
ing the power back on again. If
the error status persists, contact
your FUJITSU scanner dealer
or an authorized FUJITSU scan-
ner service provider.
E
461