[Export Config] Button; Filter Conditions - Fujitsu iScanner fi-6010N Operator's Manual

• [Import] button
Imports the entered scanner configuration file and returns to the "Scanner List & Config"
window.
•
If a scanner configuration file of 0MB is imported, entire scanner configu-
ATTENTION
ration information is deleted.
•
The imported scanner configuration file overwrites the current scanner
configuration.
•
If the imported scanner configuration information contains the same MAC
address or scanner name as in the existing scanner configuration infor-
mation, the MAC address or the scanner name will be recognized as
already existing. This is determined in the order of MAC address, scan-
ner name. In this case, on the table shown in
figuration" (page
marked "Yes" are replaced, and those marked with "—" are left as they
are.
•
If the same MAC address or scanner name does not exist, the imported
scanner configuration information will be added.
• [Cancel] button
Returns to the "Scanner List & Config" window without confirming the entered contents.

■ [Export Config] button

Shows the "Save As" window to specify a file to export scanner configuration. However, if the
"Include detailed scanner information." checkbox is selected, the configuration for all scanners is
exported. For details on the format of the scanner configuration file to be exported, refer to
Scanner Configuration File Format (for Importing)" (page

■ Filter Conditions

Filters the scanners displayed in the scanner list.
• Scanner Name
Enter a part of or entire scanner name of the scanner to be filtered.
This may be up to 15 characters long.
• IP Address
Enter a part of or entire IP address of the scanner to be filtered.
This may be up to 15 characters long.
• Settings Group
Select the settings group of the scanner to be filtered.
The default is "(All)".
• Add-in Group
Select the Add-in group of the scanner to be filtered.
The default is "(All)".
5.6 Setting Scanner Configuration
220), items in the "Configuration from file" column
421).
fi-6010N Network Scanner Operator's Guide
"5.6 Setting Scanner Con-
"B.2.1
5
223