Fujitsu iScanner fi-6010N Operator's Manual page 514

Code
11080001
11090001
110B0001
110B0002
110B0004
110B0100
478
Message
Number of user data stores has
reached the maximum allowed.
New users may not login until
the old user data stores are
deleted.
Application could not be
started. System restored to last
known good state. Contact a
system administrator.
Search has timed out. Contact a
system administrator.
Not connected to the network.
LDAP server is busy.
LDAP server response error.
Action
To have the user data store cleared, contact
a system administrator.
Clearing the user data store is not an undo-
able action.
"Clearing the User Data Store" (page 148)
System or user settings were restored at
system restart.
Contact a system administrator.
The administrator should check the restored
system or user settings.
Contact a system administrator to check
the time of the search timeout.
"4.7.8 Setting the Login LDAP Server"
(page 88)
Check that the system network is function-
ing normally by performing a ping test
from another machine in the network, other
than from a machine in the same server as
network printer. If the system network is
not operating properly, refer to
connect to a server using its IP address"
(page 393) for further solutions.
Try the following:
• Contact a system administrator to have
the network settings checked.
"8.3 Network Connection Troubleshoot-
ing" (page 388)
• Contact a system administrator to have
the server status checked.
Try the following:
• Contact a system administrator to check
whether the LDAP server is available.
• Set a valid user name and password.
"Failure to