Fujitsu iScanner fi-6010N Operator's Manual page 521

Code
12020100 Error: fax could not be sent.
12030001 Cannot find the network printer
path.
12030002 Access to network printer was
refused.
12030005 Network is busy. Try again
later.
12030006 User name or password may be
incorrect.
12030007 Not connected to the network.
Message
Try the following:
• Contact a system administrator to check
• If the [e-Mail address of user] option
Try the following:
• Check that the LAN cable of the scanner
• Contact a network administrator to
• Check that the spooler is operating prop-
• Contact a system administrator to check
Contact a server administrator to find out if
an access permit has been set.
Wait for a while, and try again.
Re-enter the user name and password.
Check that the system network is function-
ing normally by performing a ping test
from another machine in the network, other
than from a machine in the same server as
network printer. If the system network is
not operating correctly, refer to
connect to a server using its IP address"
(page 393)
fi-6010N Network Scanner Operator's Guide
Action
if sending fax is allowed.
button is selected for "Notification To
(Sender's e-Mail Address)", an error will
occur when a job sequence is per-
formed in the following cases:
• If the currently logged in user does
not have an e-mail address
• If logged in with the guest account
In this case, specify a user with a regis-
tered e-mail address and perform the
job sequence.
and print server is connected properly.
check that the print server is working
properly.
erly.
that the scanner IP address and network
printer settings are correct.
"8.3 Network Connection Troubleshoot-
ing" (page 388)
for further solutions.
E
"Failure to
485