6.13 Processing a Job
1. On the "Job Menu" screen, press the [Job] button.
⇒
The "Message Screen" appears.
HINT
2. Press the [OK] button on the "Message Screen".
⇒
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to
in the Scan Viewer" (page
HINT
316
•
The default setting for the [Message Screen] button is the message
screen setting set on the "Job Details" screen. For more details, refer to
"4.10.2 Setting a Job Sequence" (page
•
If "Off" is selected for the [Message Screen] button, scanning is started
without showing the "Message Screen", and the job is processed. For
more details, refer to
(page
319).
310).
[Scan Viewer] is initially "On".
154).
"6.13.1 Enabling/Disabling the Message Screen"
"6.10 Editing the Scanned Data