Fujitsu iScanner fi-6010N Operator's Manual page 200

3. Set the [Job Name], [Comment], and [If error occurs].
Enter a job name in [Job Name]. This may be up to 64 characters long.
Enter comments about the job sequence in [Comment]. This may be up to 256 characters
long.
For [If error occurs], if an error occurs while an item in the job sequence is being performed,
set whether or not to continue with unfinished items before ending a job.
•
If [Proceed to next Job Item] is selected
If an error occurs while an item in the job sequence is being performed, job processing
proceeds to the next item in the sequence and completes all unfinished items before
ending a job.
•
If [Terminate the Job] is selected
If an error occurs while an item in the job sequence is being performed, job processing
ends without completing any unfinished items.
4. Select the [ ] button to the left of [Scan Settings].
Set the desired scan options, such as Carrier Sheet, color mode, and paper size.
For details about setting values, refer to
164
"6.8 Setting the Scan Options" (page 304).