Fujitsu iScanner fi-6010N Operator's Manual page 506

Screen
Save
470
Message
User name or password may be incor-
rect.
Cannot find the network folder path.
File already exists. Choose a different
name or change the overwrite permis-
sion setting.
Not connected to the network.
Access to network folder was refused.
Network path is too long.
Insufficient free space in the desig-
nated network folder.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Action
Try the following:
• Directly enter a valid user name
and password.
• Check that the proxy server is
operating properly.
• Contact an administrator to
check that the IP address set-
tings, FTP server network
folder, or proxy server settings
are correct.
"8.3 Network Connection Trou-
bleshooting" (page 388)
Contact a server administrator.
Change the file name, or select
[Yes] to overwrite the file with the
same name.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network folder. If
the system network is not operat-
ing properly, refer to "Failure to
connect to a server using its IP
address" (page 393) for further
solutions.
Contact a server administrator to
find out if an access permit has
been set.
Try the following:
• Set a shorter file name.
• Select a "Save in" folder with a
shorter name.
• Contact a system administrator
to have the folder path name
shortened.
Ensure the free space requirements
are met, and try again.
Close unneeded network connec-
tions, then try specifying the
desired network path again.