Cleaning The Adf - Fujitsu iScanner fi-6010N Operator's Manual

7.2

Cleaning the ADF

The ADF should be cleaned after approximately every 1,000 scanned sheets. However, this criteria
varies according to the type of documents scanned. For example, it may be necessary to clean the
ADF more frequently when documents with insufficiently fused toner are scanned.
AUTION

7.2.1 Cleaning the ADF

1. Push the ADF release button, then hold both sides of the top cover and lift it open.
358
The glass scanner windows inside the ADF can become hot when the
scanner is used.
Before cleaning inside the scanner or replacing any parts, turn off the
power, unplug the AC adapter from the outlet, and wait for at least 15
minutes.
The power does not need to be turned off when cleaning the feed rollers.
old both sides
to open
AUTION
Push the ADF release button to open
Be careful that the top cover does not shut on your
fingers.