Fujitsu iScanner fi-6010N Operator's Manual page 527

Code
13061001 Scan error occurred.
File name: XXXX
13061002
Error code: XXXX
13061003
13080001 Scanner firmware update failed.
The administrator should
contact the FUJITSU scanner
dealer or an authorized
FUJITSU scanner service
provider for help.
Scanner firmware version:
XXXX
83070006 Scanner hardware failure. The
administrator should contact the
83070007
FUJITSU scanner dealer or an
83070008
authorized FUJITSU scanner
service provider for help.
8307000C
84000001 An error has occurred. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits]
Message
Shutdown and press the startup button to
restart the scanner.If the error status per-
sists, contact your FUJITSU scanner dealer
or an authorized FUJITSU scanner service
provider.
Contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider.
Shutdown and press the startup button to
restart the scanner.
If the problem persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Try the following:
• If the scanner does not restart automati-
• If the error status persists after the scan-
fi-6010N Network Scanner Operator's Guide
Action
cally, press the [Shutdown] button on
the "Login" screen to turn the power off,
and turn the power back on again to
restart the scanner.
ner is restarted, press the [Shutdown]
button on the "Login" screen, disconnect
the AC cable from the scanner to turn
the power off, wait for at least ten sec-
onds, then reconnect the AC cable and
try turning the power back on again. If
the error status persists, contact your
FUJITSU scanner dealer or an autho-
rized FUJITSU scanner service pro-
vider.
E
491