Fujitsu iScanner fi-6010N Operator's Manual page 504

Screen
Print Server
Authentication
468
Message
User name is required.
Network is busy. Try again later.
User name or password may be incor-
rect.
Cannot find the network printer path.
Not connected to the network.
Access to network printer was refused.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Specified user is no longer able to
login to this network printer.
Action
Enter a user name.
Wait for a while, and try again.
Re-enter the user name and pass-
word.
Try the following:
• Contact a server administrator.
• Check that the spooler is operat-
ing properly.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network printer. If
the system network is not operat-
ing properly, refer to "Failure to
connect to a server using its IP
address" (page 393) for further
solutions.
Contact a server administrator to
find out if an access permit has
been set.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated.