Fujitsu iScanner fi-6010N Operator's Manual page 503

Screen
Print Specified user needs to renew their
password for this network printer.
Access to network printer was refused.
The specified account is currently
locked out.
Access to network printer was refused.
Login is not possible at this time.
Could not connect to the network
printer.
Error: network printer could not be
accessed.
Invalid No. of copies. Enter a value
between 1 and 99, and try again.
Message
fi-6010N Network Scanner Operator's Guide
Action
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the password
changed.
Contact a network administrator to
have the account unlocked.
Try the following:
• Try again when login is possi-
ble.
• Contact a network administrator
to have the time setting
changed.
Try the following:
• Check that the LAN cable is
connected properly to the scan-
ner and print server.
• Contact a network administrator
to check that the print server is
working properly.
• Check that the print server
spooler is operating properly.
• Contact a network administrator
to find out if an access permit
has been set.
• Contact a system administrator
to check that the scanner IP
address and network printer set-
tings are correct.
"8.3 Network Connection Trou-
bleshooting" (page 388)
Contact a network administrator to
check whether the network printer
can be accessed.
Enter a valid No. of copies.
Only numbers 1 to 99 can be used.
E
467