Upload & Release A New Set Of Scanner Settings - Fujitsu iScanner fi-6010N Operator's Manual

■ Upload & Release a New Set of Scanner Settings
Uploads scanner settings and issues an update call as needed.
The new set of scanner settings will be released, and applied to the scanners when one of the fol-
lowing occurs:
• Scanner is started, or resumed from the standby mode
• Scanner is logged out
• Scanner is notified of any update modules
Updates can be applied to the scanners that are in power-off or standby mode using Wake-On-
LAN. However, if the update is released while logged in to a scanner, the update will be applied
after logged out.
If scanner settings are already available, the scanner settings are replaced.
• [Edit Scanner Settings] button
Shows the "Edit Scanner Settings" window to set up the scanner settings.
If scanner settings are available, the available scanner settings values are shown.
If no scanner settings have been released, the default values are shown.
If you return to the Main Menu from the "Scanner Settings" screen without
ATTENTION
registering the scanner settings, the edited contents will be lost.
• [System Settings] tab
The setting items are the same as those set in the system settings menu in the window for
administrator operations. For details, refer to
51).
However, the "Import Scanner Settings" button for the "System Settings" menu is only dis-
played on the Central Admin Console "Edit Scanner Settings " window.
5.9 Updating the Scanner System Settings
"4.6 Using the System Settings Menus" (page
fi-6010N Network Scanner Operator's Guide
5
233