Fujitsu iScanner fi-6010N Operator's Manual page 526

Code
12040011
12130001
13060001
1306001A
1306001D
1306002C
1314002C
490
Message
"Save as:" filename contains
invalid characters (:*?"<>|), or
is set to a reserved string (CON,
PRN, AUX, CLOCK$, NUL,
COM0, ..., COM9, LPT0, ...,
LPT9).
Re-enter the filename and try
again.
Error: Scan&Buffer process
could not output data for the
scheduled jobs.
Scanner initialization has
failed. Try turning the power
off and back on again. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help
Insufficient memory. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
Insufficient memory. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
Action
The following characters and reserved
strings cannot be used.
: * ? " < > | CON PRN AUX CLOCK$
NUL COM0 ... COM9 LPT0 ... LPT9
Re-enter the file name using only valid
characters.
Try again.
Try the following:
• Check that the cables are connected to
the scanner properly.
• If the scanner does not restart automati-
cally, press the [Shutdown] button on
the "Login" screen to turn the power off,
and turn the power back on again to
restart the scanner.
• If the error status persists after the scan-
ner is restarted, press the [Shutdown]
button on the "Login" screen, disconnect
the AC cable and try turning the power
back on again. If the error status persists,
contact your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider.
System might be unstable.
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Reduce the size of the scan data or set a
lower resolution level, and try again.