Access Codes And Authority Level Settings - Interlogix Advent Installation Instructions Manual

Table A11: Programmable Output Types, Event Triggers, Responses, and Locations (Continued)
Partition/
Output #
Area No. Trigger

Access Codes and Authority Level Settings

Table A12 shows the default access codes and Table A13
shows default authority level settings. Document any
changes in the tables.
Table A12: Default Access Codes
Partition Default Code
1 1234
2 2345
3 3456
4 4567
5 5678
6 6789
7 7890
8 8901
Global 2020
Installer 0123
* The primary global access code is user #5 in 4 partition systems, and
user #9 in 8 partition systems.
Commercial Burglary and Home Navigator System
Event
Response
Authority User #
Primary 1
Primary 2
Primary 3
Primary 4
Primary 5
Primary 6
Primary 7
Primary 8
Primary 5 or 9*
Installer 0
Output Type
Table A13: Authority Level Settings Programming
á á á
1
á á á
2
á á
3
á á
4
á á
5
á á
6
7
8
* Factory defaults shown. Write in actual settings.
Primary (prime) authority - of which there is only one per partition/area is
required to assign full and duress authorities. Primary, full and duress
authority levels (not shown) are not programmable.
Appendix A: System Configuration Worksheets
Location [Display Text]
Setting Description
á á á á
á á á á
á á á á
á á á
á á á
á á á
á
á
69