Table of Contents
Advertisement
4.
After pressing a button on the START MENU the
system voice will prompt you to then use the MAIN
MENU.
The MAIN MENU includes the following buttons:
Light Control
Option #
Sensor/Remote
Access Code
Press the appropriate button. Depending on the button you
pressed, the system will prompt you to continue by press-
ing other buttons on the panel.
Access Codes
Your security system has a master access code, access
codes 1-5, and a panic code used for arming and disarming
the panel. The master code is used for disarming and pro-
gramming your system. Access codes 1-5 are generally
used for children or as temporary codes for a baby-sitter or
service personnel. The panic code may be entered to arm,
disarm or subdisarm the system in a non-medical emer-
gency situation. The panel will call the central station with
a panic alarm report, but there will be no indication of an
alarm at the panel.
Note
Codes are always needed to disarm the system.
Depending on the panel configuration, codes may be
needed to arm the system.
Your system may be set up so that the master code or an
access code is required when arming. If so, the panel will
prompt you to enter a code when you attempt to arm the
system.
Note
Because different codes can be entered using the
same button presses you have to use caution when
programming the panic code. You need to ensure
that the panic code does not use the same button
presses as other access codes. For example if the
master code is 1234, do not program the panic code
to be 2244. The panel would interpret these codes to
be the same code.
How to change an Access Code:
1.
Open the cover of the panel.
2.
The panel voice prompts you to Use numbered keys to
enter ID. Enter your master access code using the
numbered keys.
3.
The panel voice prompts you to Please select from
START MENU. Press the Add button on the START
MENU.
4.
The panel voice prompts you to Select from MAIN
MENU. Press the Access Code button on the MAIN
MENU.
5.
The panel voice responds with Master Code, press
again for next access code or DONE to select or
CANCEL to quit. Press the access code button again
to hear the next access code. When you hear the
access code you wish to change press the DONE
Button.
6.
Enter 3-6 new numbers using the numbered keys.
7.
Close the panel cover.
How to Delete an Access Code:
Delete Access Code
Delete
1.
Open the cover of the panel.
2.
The panel voice prompts you to Use numbered keys to
enter ID. Enter your master access code using the
numbered keys.
3.
The panel voice prompts you to Please select from
START MENU. Press the Delete button on the
START MENU.
4.
The panel voice prompts you to Select from MAIN
MENU. Press the Access Code button on the MAIN
MENU.
5.
The panel voice responds with Access Code 1, press
again for next access code or DONE to select or
CANCEL to quit. Press the access code button again
to hear the next access code. When you hear the
access code you wish to delete, press the DONE But-
ton. The panel voice responds with Access Code X
deleted.
6.
Close the panel cover.
Light Control
You system has the ability to control lights from the panel.
A specific light or group of lights can be programmed to
turn on and off at designated times.
House Code
Refers to a group of lights that can be controlled from the
panel.
Note
The panel lists house codes A - O. Ask your installer
what house code your lights are set up on.
Unit Number
Refers to a specific light within a house code.
How to set time for light control:
1.
Open the cover of the panel.
2.
The panel voice prompts you to Use numbered keys to
enter ID. Enter your master access code using the
numbered keys.
3.
The panel voice prompts you to Please select from
START MENU. Press the Add button on the START
MENU.
9
Hide quick links:
Advertisement
Table of Contents
