Access Codes - Interlogix XTI-5 Installation Manual

Access codes

To add/edit access codes:
1. From the Programming screen, press ACCESS CODES.
2. To add or edit an access code, press the white field next to the access code.
3. Enter the new/edited code on the numbered keypad and press SAVE.
4. Press CLOSE repeatedly to exit menus
Table 10: Access Codes menu
Function Default
Dealer code 4321
Installer code 4321
Master code 1234
User codes 1 to Blank
8
Duress code Blank
Code length Four
digits
Contents Simon XTi-5 Installation Manual
Description
You can use the dealer code to program all system options,
including high-security options that are not accessible with the
installer code if it is different from the dealer code. Changing the
dealer code to differ from the installer code will prevent the
installer from viewing certain fields.
If you change the dealer code and enter program mode with the
installer code, the installer will no longer be able to see the
following: code length, downloader code, phone lock, phone #1,
phone #2, phone 1 report mode, phone 2 report mode, HW1
function.
You can use the installer code to program most installer options,
except for high-security dealer options.
You can use the master to arm/disarm, enter user programming,
and bypass sensors.
You can use the user codes to arm/disarm the system.
Use the duress code in place of the master or user code to cause
a silent alarm.
Codes can be three to six digits long.
35