Accessing The Door/Lift Programming Menu; How To Access The Door / Lift Programming Menu - Interlogix ATS125 Series Programming Manual

Accessing the door/lift programming menu

How to access the door / lift programming menu

Access to the Door programming menu is via the Advisor Master, Installer menu
28, To remote devices. When programming in the 4-Door programming menu,
you are actually programming ATS125x.
Before being granted access to the 4-Door programming menu, via "to remote
devices", ATS125x must be; connected, addressed, and programmed to be
polled. Also the DGP type must be programmed as a "4-Door DGP" or a "4-Lift
DGP" in the Advisor Master Installer programming menu 4, DGP database.
If you are denied access to "To remote devices", it is because one or more of the
above hardware, or programming criteria, have not been met.
1. The display shows:
Remote Device: 1-DGP, 2-RAS
Device:
Enter the type of Remote device you wish to program. Select 1 (DGP).
2. The display shows:
Remote DGP Setup
DGP No.:
Enter the number of the Remote device you wish to program. The DGP
number is the same as the DGP address.
3. The following is briefly displayed:
Connecting...
Enter to Abort
4. You have now accessed the ATS125x Programming menu for ATS125x/1260
that you have selected. The display shows the 4-Door programming menu
display:
"*" –Move On "*" Move
Menu Option:
See "Programming the menu options" on page 7 for the available keys.
See also "Programming map" on page 69 for the complete programming menu.
ATS125x/1260 Four-Door/Four-Lift DGP Programming Guide 9