Table of Contents
Advertisement
Programming the Panel
Dealer Access Code
Default = None
Enter a six-digit Dealer Access code. This code is used to access
special programming menus such as setting reporting phone num-
bers or account numbers when the panel is in program mode. If
this code is not set, these programming menus require no special
code to access.
Setting the Dealer Access Code:
1. Once the item number has been entered, enter any six-digits
(0–9) then press #.
2. When prompted, enter the six-digit code again (for verifica-
tion), and press #.
3. The touchpad will display
Changing/Deleting the Dealer Access Code:
1. Once the item number has been entered, enter the six-digit
dealer code.
2. Wait until the touchpad displays
q enter a new six-digit dealer code or,
q enter
+
to delete the dealer access code (no
0
#
code).
3. Enter the new code again.
4. The touchpad will display
Note
If a Dealer Access Code has been set clearing the
panel's memory will not clear the Dealer Access Code,
Reporting Phone Numbers, or Account Numbers. If the
Dealer Access Code is set, the forgotten, the only way to
clear it is to return the panel to the factory.
Downloader Access Code
Default = 12345
Enter a five-digit access code to be used in conjunction with
downloader programming.
Note
This code must match (or be left at default) the down-
loader access code programmed in downloader in order
for the two to communicate.
Changing the Downloader Access Code:
1. Enter the item number.
Note
If a Dealer Access Code has been programmed, you will
be prompted to enter it.
2. Once the Dealer Access Code has been entered (if applicable)
the touchpad will display the current Downloader Access
Code.
3. Enter any five-digits (0–9) for the new Downloader Access
code, then press #.
24
17107
.
NEW CODE OK
then
ENTER NEW CODE
.
NEW CODE OK
17108
Access Code Length
Default = 4
Select the required length of all installer, primary, and user access
codes. If the access code length is changed, then all access codes
will automatically be updated to the correct length. Access codes
that contained less digits than the new length will be given lead-
ing zeros (1234 = 001234). Access codes that contained more dig-
its than the new length will be have the first digit(s) removed
(987654 = 7654).
Changing the Access Code Length:
1. Enter the item number. The current code length will be dis-
played.
2. Enter the new code length (4–6) and press #.
Phone Settings
Enable Phone Line 1 DTMF Dialing
Enable Phone Line 2 DTMF Dialing
Defaults = 1 (On)
Select whether or not you want to enable the phone line for
DTMF (touch-tone) dialing. If off, the panel will dial using pulse
format.
To Set Dialing format:
Once the item number has been entered, enter
setting on (DTMF dialing) or
Press
#
to apply the new setting.
Phone Line 1 Dialing Prefix
Phone Line 2 Dialing Prefix
Defaults = None
Enter up to a six-digit phone line dialing prefix. Use this setting to
access an outside line, disable call waiting, etc.
Line Dial Prefix Format
q
Enter 00–09 for numbers 0-9
q
Enter 10 for * (star)
q
Enter 11 for # (pound)
q
Enter 12 for D (1–5 second delay)
q
Enter 13 for W (wait for dial tone)
Setting a Line Dialing Prefix:
1. Once the desired item number has been entered the current
line dial prefix will be displayed.
2. Enter up to a six-digit phone line dialing prefix using the for-
mat above and press #.
Deleting a Line Dialing Prefix:
1. Once the desired item number has been entered the current
line dial prefix will be displayed.
2. Enter 0 + #. The touchpad will display
Commercial Burglary and Home Navigator System
50013
17094
17095
1
to turn this
0
to turn it off (pulse dialing).
17105
17106
.
NO DATA
Advertisement
Table of Contents
