Table of Contents
Advertisement
Set Holiday A List
Set Holiday B List
Defaults = NA
Holiday lists allow you to set up time periods when regular sched-
ule hours vary. A holiday is defined as one day. A separate holi-
day must be added in order to span over consecutive days. Once
set up, users can incorporate holidays into schedules. Each parti-
tion/area has 2 lists (A and B) and each list has up to 8 holidays.
Document holidays in the User's Guide.
To Add a Holiday:
1. Enter the installer code.
2. Enter the desired item number. The display shows
/
PARTITION
AREA NUMBER OR PRESS
3. Enter the partition/area number (1–8) and press #. The display
shows
ENTER HOLIDAY NUMBER OR PRESS
4. Enter the desired holiday number (1–8) and press #. The panel
display shows
HOLIDAY DATA IS CURRENT DATA
5. Enter a 2-digit month (01-12), a 2-digit day (01–31), and
press #. For example, if the holiday fell on July 4, you would
enter 0704.
6. The display shows the new holiday setting.
To Delete a Holiday:
1. Enter the installer code.
2. Enter the desired item number. The display shows
/
PARTITION
AREA NUMBER OR PRESS
3. Enter the partition/area number (1–8) and press #. The display
shows
ENTER HOLIDAY NUMBER OR PRESS
4. Enter the desired holiday number (1–8) and press #. The panel
display shows
HOLIDAY DATA IS
5. Enter 0 + #. The display shows
Commercial Burglary and Home Navigator System
50008
50009
ENTER
*
.
TO CANCEL
*
.
TO CANCEL
.
ENTER
*
.
TO CANCEL
*
.
TO CANCEL
current data.
.
HOLIDAY DATA IS NO DATA
Set Event Configuration and Alarm Masks
Defaults = NA
This setting allows you to specify how you want events reported.
Note
Whenever possible, use Advent Downloader to set con-
figuration masks.
Event masks are represented by an eight-digit event mask number
where 0 = off and 1 = on. For example, if an event mask reported
to phone 1, phone 2, history buffer, and was high priority, it would
be represented as "11010001" (see event mask formats below). If
you wanted the same event mask to stop reporting to phone 2, you
would change the event mask number to "10010001." Notice how
the place holder for phone 2 was changed from a 1 (on) to a 0
(off). (From 11010001 to 10010001).
Event Mask Formats:
1—Reporting Phone 1
2—Reporting Phone 2
3—Print
4—History Buffer (Store)
To Set a Configuration Mask:
1. Enter 50010. The display shows
*
.
PRESS
TO CANCEL
2. Enter the event general type (1–19) using Table B8 on
page 97, then press #. The display shows
*
SPECIFIC TYPE OR PRESS
TO CANCEL
3. Enter the event specific type using Table B8, and press #. The
display shows
ENTER PARTITION NUMBER OR PRESS
4. Enter the desired partition/area (1–8) and press #. The display
shows the eight-digit event mask, then
#
.
OR PRESS
TO ACCEPT
5. Enter the desired 8-digit event mask (0 = off, 1 = on, and
2 = unchanged), then press #.
Alarm Event Formats:
1—Not Used
2—Not Abortable
3—Reporting Delay (part 1)*
4—Reporting Delay (part 2)*
Reporting Delay Formats:
00 = Immediate, 01 = Fire delay, 10 = Panic delay, 11 = Standard
delay.
To Set an Alarm Event:
1. Enter 50010. The display shows
*
.
PRESS
TO CANCEL
2. Enter the event general type (0) and then press #. The display
shows
ENTER EVENT SPECIFIC TYPE OR PRESS
3. Enter the alarm specific type using Table B8, and press #. The
display shows
ENTER PARTITION NUMBER OR PRESS
4. Enter the desired partition/area (1–8) and press #. The display
shows the eight-digit event mask, then
#
.
OR PRESS
TO ACCEPT
5. Enter the desired 8-digit event mask (0 = off, 1 = on, and
2 = unchanged), then press #.
Print Zone & Device Information
Default = NA
Sends programmed zone and device information to the printer.
To Print Zone and Device Information:
Enter 50012. Zone and Device information will print.
Programming the Panel
50010
5—Pager
6—Report to Backup
7—(not used)
8—High Priority
ENTER EVENT GENERAL TYPE OR
ENTER EVENT
.
*
TO CANCEL
ENTER NEW EVENT MASK
5—(leave at default)
6—(leave at default)
7—(leave at default)
8—(leave at default)
ENTER EVENT GENERAL TYPE OR
*
.
TO CANCEL
*
TO CANCEL
ENTER NEW EVENT MASK
50012
.
.
43
Advertisement
Table of Contents
