Table of Contents
Advertisement
System Settings
Note
Date, time, and day settings affect all partitions/areas.
System Date
Default = 01 01 00 (1/1/00)
This setting lets you adjust the panel calendar to the correct
month, day, and year.
To Set the System Date:
1. Enter the item number.
2. Enter the correct month (01–12), day (01–31), and year
(00–99). For example, enter 090100 for September 1, 2000.
3. Press #. The display shows the new date.
System Time
Default = 12 00 00 (12:00:00)
This setting lets you adjust the panel clock to the correct time.
The panel uses a 24-hour clock. For example, to set the time to
4:17:00 PM, enter 161700.
To Set the System Time:
1. Enter the item number.
2. Enter the correct time 00(0000–235959).
3. Press #. The display shows the new time.
System Day of Week
Default = 5 (Saturday)
This setting lets you adjust the panel to the current day of week.
Note
Day of week is automatically set when system date is set
(for dates in 21st century).
Day Format:
q
q 4—Friday
0—Monday
q
q 5—Saturday
1—Tuesday
q
q 6—Sunday
2—Wednesday
q
3—Thursday
To Set the System Day of Week:
1. Enter the item number.
2. Enter the day of week using the above format (0–6) and
press #.
Time Format
Default = 0 (Off)
This setting allows you to choose whether the panel time format is
in 12- (AM and PM) or 24-hour format. If on, the panel will
announce and display the time in 24-hour format.
To Turn Time Format On/Off:
1. Once the item number has been entered, enter 1 for on, or 0
for off.
2. Press # to apply the new setting.
Commercial Burglary and Home Navigator System
Detect Receiver Failure
Default = 1 (On)
17001
When on, (and a wireless commercial transceiver is installed), the
panel will detect and indicate wireless receiver failure. This
means the panel has received no messages from any wireless zone
for 2 hours.
To Turn Detect Receiver Failure On/Off:
1. Once the item number has been entered, enter 1 for on, or 0
for off.
2. Press # to apply the new setting.
Downloader Callback
Default = 0 (Off)
17002
Select whether or not to have the panel call back the downloader
when the downloader calls out to the panel with a job. This
increases security of the downloader sessions by insuring that all
downloads are performed by a Downloader that is connected to
one of the panel's programmed Downloader phone numbers.
To Turn Downloader Callback On/Off:
1. Once the item number has been entered, enter 1 for on, or 0
for off.
2. Press # to apply the new setting.
17003
Phone Off-Hook is Activity
Default = 1 (On)
Select whether or not a phone off-hook condition is considered an
activity. See no activity internal (xx009)
Note
For residential use only.
To Turn Phone Off-Hook is Activity On/Off:
1. Once the item number has been entered, enter 1 for on, or 0
for off.
2. Press # to apply the new setting.
RF Supervisory Time A
(Default = 4 Hours - Commercial Burg,
24 Hours - Home Navigator)
RF Supervisory Time B
(Default = 24 Hours- Commercial Burg,
4 Hours - Home Navigator))
17100
The RF Supervisory Time is the time (in hours) in which the
panel must receive a transmission from a wireless zone. If the
panel does not receive a transmission within this time window, a
trouble report occurs. Advent panels have two RF Supervisory
Times (A and B). All wireless zones default to using Supervisory
Time A. Use 47004 to change Supervisory Time.
To Set RF Supervisory Time:
1. Enter the desired item number.
2. Enter the RF Supervisory Time in hours (2–24).
3. Press # to apply the new setting.
Programming the Panel
17078
17122
17092
17049
17050
39
Advertisement
Table of Contents
