Ricoh G133 Service Manual page 554

Service Mode Table
Enables or disables the e-mail transfer function. This SP sets the RAM disk
size for the e-mail transfer function.
5870 [Common Key Info Writing]
001 Writing
003 Initialize
5873 [SD Card Appli Move]
001 Move Exec
002 Undo Exec
5878 [Option Setup]
001 Option Setup
[Line Speed Selection]
5883
Selects the line speed for middle thick paper.
001 Middle Thick
G133
Writes to flash ROM the common proof for
*CTL validating the device for @Remote
specifications.
Initializes the authentication data (used for
*CTL
@Remote) in the memory.
This SP copies the application programs from the original
SD card in SD card slot 3 to an SD card in SD card slot 2.
This SP copies back the application programs from an SD
card in SD Card Slot 2 to the original SD card in SD card slot
3. Use this menu when you have mistakenly copied some
programs by using "Move Exec" (SP5873-1).
Enables the Data Overwrite Security unit.
- Press "EXECUTE" on the operation panel.
Then turn the machine off and on.
[0 or 1 / 1 / 1 /step]
0: MID CARD: Half Speed (115 mm/sec)
*ENG
1: MID CARD: Normal Speed (205
mm/sec)
5-232 SM