Ricoh G133 Service Manual page 336

Service Mode Table
014 Tray 2/3/4/5: Thin
015 Tray 2/3/4/5: Middle Thick *ENG
016 By-pass: Thin
017 By-pass: Middle Thick
018 By-pass: Thick 3
019 Duplex: Thin
020 Duplex: Middle Thick
1007 [By-Pass Size Detection] By-Pass Size Detection Display
LG
Enables or disables the automatic paper size detection function of the by-pass
tray.
001
This SP determines what paper size the machine detects if the detected size is
less than 8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1103 [Fusing Idling] Fusing Idling Adjustment
Extra Idling Time
001
Specifies how long the extra idling operation is executed.
016 Extra Idling Time (L)
017 Extra Idling Time (H)
018 Extra Idling Time (M)
G133
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [0 or 1 / 0 / – ] 0: Disable, 1: Enable
*ENG [0 to 60 / 0 / 1 sec/step] Not used
Specifies how long the extra idling
operation is executed for each
environment.
*ENG
[0 to 250 / 60 / 1 sec/step]
Each environment is determined with
SP1112-001 and 002.
*ENG
[0 to 250 / 25 / 1 sec/step]
*ENG
5-14 SM