Ricoh G133 Service Manual page 451

Separation DC: Plain: 2nd
006
Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Special 1: L Edge: Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2772
plate at the paper leading edge between the erase margin area and the image
area.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
005 Separation DC: Plain: 1st Page
Separation DC: Plain: 2nd
006
Page
007 Separation DC: Fine: 1st Page
008 Separation DC: Fine: 2nd Page
[Special 1: Trailing Edge Correction] Special 1 Paper: Trailing Edge
Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2773
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: 205 mm/sec, Fine: 77 mm/sec
The paper trailing edge area can be adjusted with SP2774.
SM
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
[0 to 30 / 20 / 1 mm/step]
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
*ENG
[0 to 30 / 0 / 1 mm/step]
*ENG
5-129
Service Mode Table
G133