Ricoh G133 Service Manual page 447

[Thick 6: MM] Thick 6 Paper: MM Environment Coefficient Adjustment
2720
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2711 and SP2712 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
[Thick 6: MH] Thick 6 Paper: MH Environment Coefficient Adjustment
2721
Adjusts the environment coefficient for each mode. When the environment is
detected as MH, SP2711 and SP2712 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
[Thick 6: HH] Thick 6 Paper: HH Environment Coefficient Adjustment
2722
Adjusts the environment coefficient for each mode. When the environment is
detected as HH, SP2711 and SP2712 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
[Special 1: Bias]
2751
Adjusts the DC voltage of the discharge plate for special paper 1.
Plain: 205 mm/sec, Fine: 77 mm/sec
001 Separation DC: Plain: 1st Side
002 Separation DC: Plain: 2nd Side
003 Separation DC: Fine: 1st Side
004 Separation DC: Fine: 2nd Side
SM
*ENG
[10 to 250 / 100 / 5%/step]
*ENG [10 to 250 / 100 / 5%/step]
*ENG [10 to 250 / 110 / 5%/step]
*ENG [10 to 250 / 90 / 5%/step]
*ENG [10 to 250 / 120 / 5%/step]
*ENG
[10 to 250 / 80 / 5%/step]
*ENG
[0 to 5000 / 1500 / 10
–V/step]
*ENG
*ENG
[0 to 5000 / 1000 / 10
–V/step]
*ENG
5-125
Service Mode Table
G133