Ricoh G133 Service Manual page 549

[Remote ROM Update]
5856
Allows the technician to upgrade the firmware using a local port (IEEE1284)
when updating the remote ROM.
002 Local Port
5857 [Save Debug Log]
On/Off (1:ON 0:OFF)
5857 1
Switches the debug log feature on and off. The debug log cannot be captured
until this feature is switched on.
Target (2: HDD 3: SD)
5857 2 Selects the storage device to save debug logs information when the
conditions set with SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
005
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
009 HDD to SD Card Latest
010 HDD to SD Card Any
011 Erase HDD Debug Data
012 Erase SD Card Debug Data
013 Dsply-SD Space
SM
[0 to 1 / 0 / 1/step]
*CTL 0: Disable
1: Enable
*CTL -
0: OFF, 1: ON
2: HDD, 3: SD Card
5-227
Service Mode Table
G133