Ricoh G133 Service Manual page 429

detected as HH, SP2551 is multiplied by these SP values.
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[OHP: Bias]
2601
Adjusts the DC voltage of the discharge plate for OHP.
001 Separation DC
[OHP: Bias: BW]
2603
Adjusts the current for the paper transfer roller for OHP in black-and-white
mode.
001 Paper Transfer
[OHP: Bias: FC]
2608
Adjusts the current for the paper transfer roller for OHP in full color mode.
001 Paper Transfer
[OHP: Paper Size Correction]
2611
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2603 and SP2608 are multiplied by these SP values.
001 Paper Transfer: S1
002 Paper Transfer: S2
003 Paper Transfer: S3
SM
*ENG
[10 to 250 / 80 / 5%/step]
*ENG
*ENG
[0 to 5000 / 1000 / 10 –V/step]
*ENG
[0 to 200 / 12 / 1 –μA /step]
*ENG
[0 to 200 / 15 / 1 –μA /step]
[100 to 600 / 100 / 5%/step]
*ENG
S1 size ≥ 297 mm (Paper width)
[100 to 600 / 140 / 5%/step]
*ENG 297 mm ≥ S2 size ≥ 275 mm (Paper
width)
[100 to 600 / 200 / 5%/step]
*ENG
275 mm ≥ S3 size ≥ 210 mm (Paper
5-107
Service Mode Table
G133