Ricoh G133 Service Manual page 472

Service Mode Table
003 All
[Drum Stop Angle]
2906
DFU
001 Y
002 C
003 M
004 Bk
[ACS Setting (FC to Bk)]
Adjusts the threshold for moving away the image transfer belt from the color
PCUs. This SP moves the image transfer belt away from the color PCUs when
2907
the number of B/W image printouts reaches the number of sheets specified
with this SP after consecutive full color image printouts in the full color mode.
If SP2907-002 is off, the image transfer belt does not move away.
001 Continuous Bk Pages
002 ON/OFF
[Gain Adjust] Gain Adjustment of Image Transfer Belt Motor
2908
DFU
001 205 mm/sec
002 154 mm/sec
003 115 mm/sec
004 77 mm/sec
G133
*ENG [0 to 200 / 30 / 10 msec/step]
*ENG
*ENG
[0 to 359 / 0 / 1 deg/step]
*ENG
*ENG
*ENG [1 to 10 / 1 / 1 sheet/step]
[0 or 1 / 0 / - ]
*ENG
0: ACS OFF, 1: ACS ON
[0 or 1 / 0/ 1/step]]
*ENG 0: High speed (Low level)
1: Low speed (High level)
*ENG
[0 or 1 / 1 / 1/step]]
0: High speed (Low level)
*ENG
1: Low speed (High level)
*ENG
5-150 SM