Ricoh G133 Service Manual page 446

Service Mode Table
002 Separation DC: 1st Page
[Thick 6: Trailing Edge Correction] Thick 6 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
2716
edge in each mode. SP2711 and SP2712 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2717.
001 Paper Transfer: 1st Side
[Thick 6: T Edge: Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2717
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
[Thick 6: LL] Thick 6 Paper: LL Environment Coefficient Adjustment
2718
Adjusts the environment coefficient for each mode. When the environment is
detected as LL, SP2711 and SP2712 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
[Thick 6: ML] Thick 6 Paper: ML Environment Coefficient Adjustment
2719
Adjusts the environment coefficient for each mode When the environment is
detected as ML, SP2711 and SP2712 are multiplied by these SP values.
001 Paper Transfer: 1st Side
002 Separation DC: 1st Side
G133
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[–100 to 0 / 0 / 1 mm/step]
*ENG
[10 to 250 / 80 / 5%/step]
*ENG [10 to 250 / 180 / 5%/step]
*ENG [10 to 250 / 90 / 5%/step]
*ENG [10 to 250 / 140 / 5%/step]
5-124 SM