Ricoh G133 Service Manual page 463

004 Paper Transfer: FINE: 2nd Side
Adjusts the environment coefficient for each mode. When the environment is
005-008
detected as HH, SP2801 is multiplied by these SP values.
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side:
007 Separation DC: FINE: 1st Side
008 Separation DC: FINE: 2nd Side
[Special 3: Bias]
2851
Adjusts the DC voltage of the discharge plate for special paper 3.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Separation DC: Thick 1: 1st Side
002 Separation DC: Thick 1: 2nd Side
003 Separation DC: Fine: 1st Side
004 Separation DC: Fine: 2nd Side
[Special 3: Bias: BW]
Adjusts the current for the paper transfer roller for special paper 3 in
2852
black-and-white mode.
Thick 1: 115 mm/sec, Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Thick 1: 1st Side
002 Paper Transfer: Thick 1: 2nd Side
003 Paper Transfer: FINE: 1st Side
004 Paper Transfer: FINE: 2nd Side
2857 [Special 3: Bias: FC]
SM
*ENG
*ENG
[10 to 250 / 50 / 5%/step]
*ENG [10 to 250 / 80 / 5%/step]
*ENG
[10 to 250 / 80 / 5%/step]
*ENG
*ENG
[0 to 5000 / 1500 / 10 –V/step]
*ENG
*ENG
[0 to 5000 / 0 / 10 –V/step]
*ENG
*ENG
[0 to 200 / 30 / 1 –μA /step]
*ENG
*ENG
[0 to 200 / 12 / 1 –μA /step]
*ENG
5-141
Service Mode Table
G133