Ricoh G133 Service Manual page 540

Service Mode Table
Incorrect Setting
Error Caused by
Response from GW
URL
209 Instl Clear
250 Print Com Log
5821 [NRS Address]
001 CSS-PI Device
G133
acquiring device status.
Attempted registration without execution
-12003 of an inquiry and no previous
registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
Attempted dial up overseas without the
-2385 correct international prefix for the
telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for External RCG is illegal
-2396 Device ID for External RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its embedded RCG
setup.
Prints the communication log.
*CTL
Sets the PI device code. After you change
5-218 SM