Ricoh G133 Service Manual page 289

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1
-001
Damaged log data file in the HDD
Initialize the HDD with SP5832-004.
Log Data Error 2
An encryption module not installed
-002
1. Disable the log encryption setting with SP9730-004 ("0" is off).
2. Install the DESS module.
Log Data Error 3
Invalid log encryption key due to defective NVRAM data
-003
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting with SP9730-004 ("0" is off).
Log Data Error 4
-004
Unusual log encryption function due to defective NVRAM data
Initialize the HDD with SP5832-004.
Log Data Error 5
Installed NVRAM or HDD which is used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
-099
Other than the above causes
Ask your supervisor.
SM 4-73
SC Table
G133