Ricoh G133 Service Manual page 387

Enables/disables the automatic line position adjustment
Page: Job End: BW+FC *ENG
002
Adjusts the threshold of the line position adjustment for BW and color printing
mode after job end.
Page: Job End: FC
003
Adjusts the threshold of the line position adjustment for color printing mode
after job end.
Page: Interrupt: BW+FC
004
Adjusts the threshold of the line position adjustment for BW and color printing
mode during job.
Page: Interrupt: FC
005
Adjusts the threshold of the line position adjustment for color printing mode
during jobs.
Page: Stand-By: BW
Adjusts the threshold of the line position adjustment for BW printing mode in
006
stand-by mode. The line position adjustment is done when the number of
outputs in BW printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Page: Stand-By: FC
Adjusts the threshold of the line position adjustment for BW printing mode in
007
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Temp.
Adjust the temperature change threshold for the line position adjustment
008
(Mode b: adjustment once). The timing for line position adjustment depends on
the combinations of several conditions. For details, see 'p.6-3 "Automatic Line
Position Adjustment"' in the "Detailed Section Descriptions" section.
SM
[0 to 999 / 500 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 200 / 1 page/step]
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 999 / 100 / 1 page/step]
*ENG [0 to 100 / 5 / 1°C/step]
5-65
Service Mode Table
G133