Ricoh G133 Service Manual page 509

While making prints with low coverage, the developer is agitated with less
toner consumption and the toner carrier attraction tends to increase. This may
cause low image density or poor transfer (white dots). To prevent this, the
coagulated toner or overcharged toner has to be consumed by performing the
refresh mode.
001 Distance: DevMt: K
002 Distance: DevMt: M
003 Distance: DevMt: C
004 Distance: DevMt: Y
005 Threshold: Distance
006 Pixel Coverage: Bk
007 Pixel Coverage: M
008 Pixel Coverage: C
009 Pixel Coverage: Y
010 Required Area: Bk
011 Required Area: M
012 Required Area: C
013 Required Area: Y
014 Refresh Threshold: Bk
015 Refresh Threshold: M
016 Refresh Threshold: C
017 Refresh Threshold: Y
018 Pattern Generation Number: Bk
019 Pattern Generation Number: M
020 Pattern Generation Number: C
SM
*ENG
*ENG
[0 to 1000 / 0 / 1 m/step]
*ENG
*ENG
*ENG [0 to 1000 / 1 / 1 m/step]
*ENG
*ENG
[0 to 65535 / 0 / 1 cm
*ENG
*ENG
*ENG
*ENG
[0 to 65535 / 0 / 1 cm
*ENG
*ENG
*ENG
*ENG
[0 to 255 / 34 / 1 cm
*ENG
*ENG
*ENG [0 to 255 / 0 / 1 time/step]
*ENG
*ENG
5-187
Service Mode Table
2
/step]
2
/step]
2
/m/step]
G133