Ricoh G133 Service Manual page 543

Stateless Address 2
Active IPv6
151
Stateless Address 3
Active IPv6
153
Stateless Address 4
Active IPv6
155
Stateless Address 5
IPv6 Manual
156
Address
IPv6 Gateway
158
Address
5832 [HDD] HDD Initialization
001 Formatting (ALL)
5840 [IEEE 802.11b]
Channel Max
006
Sets the maximum number of channels available for data transmission via the
wireless LAN. The number of channels available varies according to location.
The default settings are set for the maximum end of the range for each area.
Adjust the upper 4 bits to set the maximum number of channels. DFU
SM
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits
configured in 8 blocks of 16 bits each.
This SP is the IPv6 manually set address referenced
on the Ethernet or wireless LAN (802.11b) in the
format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits
configured in 8 blocks of 16 bits each.
This SP is the IPv6 gateway address referenced on
the Ethernet or wireless LAN (802.11b). The IPv6
address consists of a total 128 bits configured in 8
blocks of 16 bits each.
*CTL -
Initializes the hard disk. Use this SP mode only if
there is a hard disk error.
[1 to 11 or 13 / 11 or 13 / 1 /step]
*CTL Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
5-221
Service Mode Table
G133