Ricoh G133 Service Manual page 362

Service Mode Table
005 Lead Edge Width: Thin
006 Duplex Trail. L Size
007 Duplex Trail. M Size
008 Duplex Trail. S Size
009 Duplex Left Width
010 Duplex Right Width
2105 [LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
High Speed: 205 mm/sec, Middle Speed: 111 mm/sec, Low Speed: 77 mm/sec
001 High Speed: Bk
002 High Speed: M
003 High Speed: C
004 High Speed: Y
005 Middle Speed: Bk
006 Middle Speed: M
007 Middle Speed: C
008 Middle Speed: Y
009 Low Speed: Bk
010 Low Speed: M
011 Low Speed: C
012 Low Speed: Y
2106 [Polygon Rotation Time]
G133
*ENG [0 to 9.9 / 5 / 0.1 mm/step]
*ENG [0 to 4 / 1 / 0.1 mm/step]
*ENG [0 to 4 / 0.8 / 0.1 mm/step]
*ENG
[0 to 4 / 0.6 / 0.1 mm/step]
*ENG
[0 to 1.5 / 0.3 / 0.1 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner
*ENG
on the output.
*ENG
Increasing a value makes lines thicker
on the output.
*ENG
*ENG
*ENG
*ENG
*ENG
5-40 SM