Ricoh G133 Service Manual page 340

Service Mode Table
089 Thick 3: FC: Simplex
091 Thick 3: BW: Simplex
093 Envelop: FC
094 Envelop: BW
Middle Thick: Middle
095
Speed: FC: Simplex
Middle Thick: Middle
097
Speed: FC: Duplex
Middle Thick: Middle
099
Speed: BW: Simplex
Middle Thick: Middle
101
Speed: BW: Duplex
Middle Thick: Constant
103
Speed: Offset
Feed Start: Extra: Offset
104
Specifies the paper feed start offset temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
Print Start: Extra: Offset
105
Specifies the image processing start offset temperature. This value is the offset
temperature in relation to the target temperature for the print ready mode.
Extra Rotation Temp.: L
106
Specifies the target temperature for extra idling mode in a low temperature
environment. The low temperature threshold can be adjusted with SP1112-003.
Extra Rotation Temp.: M
107 Specifies the target temperature for extra idling mode in a medium temperature
environment. The medium temperature is between the low temperature
threshold (SP1112-003) and the high temperature threshold (SP1112-004).
G133
*ENG
[100 to 200 / 175 / 1°C/step]
*ENG
*ENG
[100 to 180 / 160 / 1°C/step]
*ENG
*ENG
*ENG
[100 to 160 / 145 / 1°C/step]
*ENG
*ENG
*ENG [0 to 55 / 20 / 1°C/step]
*ENG [0 to 100 / 100 / 1°C/step]
*ENG [0 to 100 / 100 / 1°C/step]
*ENG
[100 to 200 / 165 / 1°C/step]
*ENG
[100 to 200 / 160 / 1°C/step]
5-18 SM