Ricoh G133 Service Manual page 277

Table of Contents

Advertisement

No.
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Software error
1.
Check and/or replace the RAM DIMM.
2.
Replace the controller.
Kernel stop error
The cache error trap occurs in the CPU.
[4361]
CPU cache error
1.
Replace the controller.
Kernel stop error
An error in the operation system (An error message is output.)
Defective CPU
Defective memory
-
Defective flash memory
Incorrect software
1.
Replace the memory.
2.
Replace the controller.
No.
Type
Details (Symptom, Possible Cause, Troubleshooting Procedures)
CTL
Self-diagnostics error: CPU
820
D
[XXXX]: Detailed error code
CPU error
[0001] to
During the self-diagnostic, the controller CPU detects an error. There
[06FF]
are 47 types of error code (0001 to 4005) depending on the cause of
[0801] to [4005]
the error. The CPU detects an error and displays the specific error code
with the program address where the error occurs.
System firmware problem
Defective controller
SM
4-61
SC Table
G133

Advertisement

Table of Contents
loading

Table of Contents