Ricoh G133 Service Manual page 287

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
An error report is sent from the SD card reader.
An error is detected in the SD card.
1. For a file system error, format the SD card on your PC.
2. For a device error, turn the mains switch off and on.
3. Replace the SD card.
4. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Address book error
An error is detected in the data copied to the address book over a
network.
Defective software program
CTL
870
Defective HDD
B
Incorrect path to the server
1. Initialize the address book data (SP5-846-050).
2. Initialize the user information (SP5-832-006).
3. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD mail data error
An error is detected in the HDD at machine initialization.
Defective HDD
CTL
872
Power failure during an access to the HDD
B
1. Turn the main switch off and on.
2. Initialize the HDD partition (SP5-832-007).
3. Replace the HDD.
SM 4-71
SC Table
G133